Description
For Tokyo Marui AEG
Recommended inner barrel length is From 400 to 500mm.
Steel & plating
It is treated with ‘Electroless Nickel Plating PTFE’. This luxurious treatment disperses particles of PTFE (Teflon) smaller than 1μm into the electroless nickel plating.
Electroless nickel plating can achieve a uniform film thickness through a reduction reaction and attain extremely high surface hardness. By applying heat treatment to the electroless nickel plating, we have achieved a hardness of about 600Hv, surpassing even stainless steel. It also excels in corrosion resistance, preventing blackening and rust.
By combining this with PTFE, it possesses ‘self-lubricating’ properties, exhibiting excellent sliding performance. As a result, the piston O-ring moves extremely smoothly, preventing heat sag due to continuous operation or high cycling.”
5mm tapered
A 5mm taper is applied to the rear end, enhancing the acceleration performance of the full cylinder. This is effective during full stroke, primarily intended for long barrel models. However, it is also very effective for settings where the cylinder volume is deliberately made larger than the length of the inner barrel.
Outer appearance is a bit rough cause lathed.
Initrnal surface is very beautiful to not happen any friction.
Reviews
There are no reviews yet.