AEG CYLINDER-SHORT BARREL-

Description

For Tokyo Marui AEG
Recommended inner barrel length is under 200mm.

Steel & plating
It is treated with ‘Electroless Nickel Plating PTFE’. This luxurious treatment disperses particles of PTFE (Teflon) smaller than 1μm into the electroless nickel plating.

Electroless nickel plating can achieve a uniform film thickness through a reduction reaction and attain extremely high surface hardness. By applying heat treatment to the electroless nickel plating, we have achieved a hardness of about 600Hv, surpassing even stainless steel. It also excels in corrosion resistance, preventing blackening and rust.

By combining this with PTFE, it possesses ‘self-lubricating’ properties, exhibiting excellent sliding performance. As a result, the piston O-ring moves extremely smoothly, preventing heat sag due to continuous operation or high cycling.”

Acceleration hole start position: 33.6mm from the tip
It is primarily suitable for models with an inner barrel length of 200mm or less, and is highly recommended for high-cycle customs and DSG (Dual Sector Gear). This model features two acceleration holes placed diagonally

Outer appearance is a bit rough cause lathed.
Internal surface is very beautiful to not happen any friction.