AEG CYLINDER-15mm Tapered-

Description

For Tokyo Marui AEG
Recommended inner barrel length is From 300 to 400mm.

Steel & plating
It is treated with ‘Electroless Nickel Plating PTFE’. This luxurious treatment disperses particles of PTFE (Teflon) smaller than 1μm into the electroless nickel plating.

Electroless nickel plating can achieve a uniform film thickness through a reduction reaction and attain extremely high surface hardness. By applying heat treatment to the electroless nickel plating, we have achieved a hardness of about 600Hv, surpassing even stainless steel. It also excels in corrosion resistance, preventing blackening and rust.

By combining this with PTFE, it possesses ‘self-lubricating’ properties, exhibiting excellent sliding performance. As a result, the piston O-ring moves extremely smoothly, preventing heat sag due to continuous operation or high cycling.”

15mm tapered
The taper at the rear end is extended to 15mm to achieve both increased cylinder volume and enhanced piston acceleration performance. A characteristic of this design is the reduced likelihood of velocity variation due to the weight of the BB pellets or the degree of applied HOP, covering a wide range of settings.

Outer appearance is a bit rough cause lathed.
Internal surface is very beautiful to not happen any friction.