Description
Guren is made of precise carbon steel & process the HV500 Coat for the surface.
This plating reinforced a hardness of the sruface so achieve around HV500.
It’s better than stainless steel (from HV200 to 400)
It’ll be kept clean & beauty surface for long time.
Of course,it’s good for anti rust.
Guren 2 is the best design for AEG chamber & has a tapered muzzle end.
The tapered muzzle makes better accuracy & FPS but become happen a lots metal chips.
So be difficult for making continuously.
But we try to keep the best price with making good Airflow.
Also Guren 2 for AEG has additional Grooving for M14.
Dia. : 6.03mm
Outer Dia. : 8.55mm
HOP window length 6mm
Using with R-hop rubber, we use square milling tool to be 90 degree on the bottom.
And the upper side,cut 45 degree to be soft for rubber.
Of course,you can use for Tokyo Marui AEG.
HOP rubber is mold injection, So it may happen small round for the edge inside.
Then you can’t push the barrel to the correct position so Guren made a bit bigger chamfer there.
So you can push the barrel to original position completely.
Easy fit to the chamber cause outer DIA. is 8.55mm around. You can put it by C clip parts.
Reviews
There are no reviews yet.