Description
Raizen is made of precise stainless steel which was the finest quality in Japan.
We’ve used this material for 20 years to create the best barrel.
Also about the design, it’s the best for AEG chamber & has a tapered muzzle end like Guren 2.
The tapered muzzle makes better accuracy & FPS.
Dia. : 6.01mm
Outer Dia. : 8.55mm
HOP window length 6mm
6.01mm is the finest tight bore.
The material has a tolerance. Stainless steel is the most precise material. This material has +-0.005mm tolerance.
It’s the finest quality in Japan (I can say in the world) So we can achieve 6.01mm bore. If make under 6.01mm, it’s possible to stuck BB in the barrel cause BB outer dia is 5.95mm. Please imgae, BB was made by plastic so can’t keep good tolerance.
So we think 6.01mm is the best choice for the tight bore,
6.01mm gain the FPS to be less air leak.
Soft fit for HOP rubber
The upper side , cut 45 degree to be soft for rubber.
Of course,you can use for Tokyo Marui AEG.
The chamfer size in the drawing is the target value.
The chamfer size may vary due to tool wear or material outer diameter tolerance.
Additionally, the chamfered area may become rounded during polishing.
HOP rubber is mold injection, So it may happen small round for the edge inside.
Then you can’t push the barrel to the correct position so Raizen made a bit bigger chamfer there.
So you can push the barrel to original position completely.
Easy fit to the chamber cause outer DIA. is 8.55mm around. You can put it by C clip parts.
What’s the difference between Raizen & R-code barrel ?
R-code barrel was designed to R-HOP unit.
Raizen is based on Marui original rubber,
Please select to make your concept.
Reviews
There are no reviews yet.